Cockpit Reference Guide
190-00763-02 Rev. A
Garmin G1000 Pilot’s Guide for the Piper PA-46 Meridian
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EICAS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
535
APPENDIX A
GDL 69A MESSAGE ADVISORIES
Message Comments
GDL69 CONFIG
– GDL 69 config
error. Config service req’d.
GDL 69 configuration settings do not match those of backup configuration memory.
The G1000 system should be serviced.
GDL69 FAIL
– GDL 69 has failed. A failure has been detected in the GDL 69. The receiver is unavailable. The G1000
system should be serviced
MANIFEST
– GDL software mismatch,
communication halted.
The GDL 69 has incorrect software installed. The G1000 system should be serviced.
GWX 68 MESSAGE ADVISORIES
Message Comments
GWX CONFIG
– GWX config error.
Config service req’d.
GWX 68 configuration settings do not match those of the GDU configuration. The
G1000 system should be serviced.
GWX FAIL
– GWX is inoperative. The GDU is not recieving status packet from the GWX 68 or the GWX 68 is reporting
a fault. The GWX 68 radar system should be serviced.
GWX SERVICE
– GWX needs service.
Return unit for repair.
A failure has been detected in the GWX 68. The GWX 68 may still be usable.
MANIFEST
– GWX software
mismatch, communication halted.
The GWX 68 has incorrect software installed. The G1000 system should be serviced.
WX ALERT
– Possible severe weather
ahead.
The GWX 68 indicates severe weather within ±10 degrees of the aircraft heading at a
range of 80 to 320 nm.
GDC 74A MESSAGE ADVISORIES
Message Comments
ADC1 ALT EC
– ADC1 altitude error
correction is unavailable.
GDC1 or GDC2 is reporting that the altitude error correction is unavailable.
ADC2 ALT EC
– ADC2 altitude error
correction is unavailable.
ADC1 AS EC
– ADC1 airspeed error
correction is unavailable.
GDC1 or GDC2 is reporting that the airspeed error correction is unavailable.
ADC2 AS EC
– ADC2 airspeed error
correction is unavailable.
MANIFEST
– GDC1 software
mismatch, communication halted.
The GDC 74B has incorrect software installed. The G1000 system should be serviced.
MANIFEST
– GDC2 software
mismatch, communication halted.