Cockpit Reference Guide

Garmin G1000 Pilot’s Guide for the Piper PA-46 Meridian
190-00763-02 Rev. A
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EICAS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
530
APPENDIX A
Message Comments
DB MISMATCH – Standby Navigation
database mismatch.
The PFDs and MFD have different standby navigation database versions or types
(Americas, European, etc.) installed. Install correct standby navigation database version
or type in all displays.
DB MISMATCH – Terrain database
mismatch.
The PFDs and MFD have different terrain database versions or types installed. Install
correct terrain database version or type in all displays.
DB MISMATCH – Obstacle database
mismatch.
The PFDs and MFD have different obstacle database installed. Install correct
obstacle database in all displays.
DB MISMATCH – Airport Terrain
database mismatch.
The PFDs and MFD have different airport terrrain databases installed. Install correct
airport terrain database in all displays.
DB MISMATCH – Airport Terrain
database mismatch.
The PFDs and MFD have different airport terrrain databases installed. Install correct
airport terrain database in all displays.
NAV DB UPDATED – Active navigation
database updated.
System has updated the active navigation database from the standby navigation
database.
TERRAIN DSP – [PFD1, PFD2 or MFD1]
Terrain awareness display unavailable.
One of the terrain, airport terrain, or obstacle databases required for TAWS in the
specified PFD or MFD is missing or invalid.
GMA 1347 MESSAGE ADVISORIES
Message Comments
GMA1 FAIL – GMA1 is inoperative.
The audio panel self-test has detected a failure. The audio panel is unavailable. The
G1000 system should be serviced.
GMA2 FAIL – GMA2 is inoperative.
GMA XTALK – GMA crosstalk error
has occurred.
An error has occurred in transferring data between the two GMAs. The G1000 system
should be serviced.
GMA1 CONFIG – GMA1 config error.
Config service req’d.
The audio panel configuration settings do not match backup configuration memory.
The G1000 system should be serviced.
GMA2 CONFIG – GMA2 config error.
Config service req’d.
MANIFEST – GMA1 software
mismatch, communication halted.
The audio panel has incorrect software installed. The G1000 system should be serviced.
MANIFEST – GMA2 software
mismatch, communication halted.
GMA1 SERVICE – GMA1 needs
service. Return unit for repair.
The audio panel self-test has detected a problem in the unit. Certain audio functions may
still be available, and the audio panel may still be usable. The G1000 system should be
serviced when possible.
GMA2 SERVICE – GMA2 needs
service. Return unit for repair.