Cockpit Reference Guide

190-00763-02 Rev. A
Garmin G1000 Pilot’s Guide for the Piper PA-46 Meridian
361
HAZARD AVOIDANCE
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EICAS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EICAS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
TERRAIN-SVS PAGE
TheTerrain-SVSPageisspecializedto showterrain, obstacle,andpotentialimpactpoint datainrelation
totheaircraft’scurrentaltitude,withoutclutterfromthebasemap.Aviationdata(airports,VORs,andother
NAVAIDs)canbedisplayedforreference.Ifanobstacleandtheprojectedightpathoftheaircraftintersect,
the display automatically zooms in to the closest potential point of impact on the Terrain-SVSPage.
Aircraftorientationonthismapisalwaysheadingupunlessthereisnovalidheading.Twoviewsareavailable
relativetothepositionoftheaircraft;the360°defaultdisplayandtheradar-likeARC(120°)display.Maprange
isadjustablewiththeRANGE Knobfrom1to200nm,asindicatedbythemaprangeringsorarcs.
Displaying the Terrain-SVS Page:
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Terrain-SVS Page.
Changing the Terrain-SVS Page view:
1) Select the VIEW Softkey.
2) Press the 360 or ARC Softkey to select the desired view.
Or:
1) Press the MENU Key.
2) Select ‘View Arc’ or ‘View 360º’, dependent on current state, and press the ENT Key to change the view.
Showing/hiding aviation information on the Terrain-SVS Page:
1) Press the MENU Key.
2) Select ‘Show Aviation Data’ or ‘Hide Aviation Data’, dependent on current state, and press the ENT Key.