Cockpit Reference Guide

190-00763-02 Rev. A
Garmin G1000 Pilot’s Guide for the Piper PA-46 Meridian
135
AUDIO PANEL AND CNS
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EICAS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
FLIGHT ID REPORTING
NOTE: If the Flight ID is required but the system is not configured for it, contact a Garmin-authorized service
center for configuration.
WhentheFlightIDmustbeenteredbeforeightoperation,theidentierisplacedintheTimer/References
WindowonthePFD.TheFlightIDisnottoexceedsevencharacters.Nospaceisneededwhenentering
FlightID.WhenaFlightIDcontainsaspace,thesystemautomaticallyremovesituponcompletionofFlight
IDentry.
Entering a Flight ID:
1) Select the TMR/REF Softkey to display the Timer/References Window.
2) Press the FMS Knob to activate the selection cursor, if not already activated.
3) Turn the large FMS Knob to scroll down to the Flight ID.
4) Turn the small FMS Knob to enter the desired Flight ID.
5) Press the ENT Key to complete Flight ID entry. The word “updating” appears until the new entry is completed.
IfanerrorismadeduringFlightIDentry,pressingtheCLRKeyreturnstotheoriginalFlightIDentry.While
enteringaFlightID,turningtheFMS Knob counterclockwise moves the cursor back one space for each detent
ofrotation.IfanincorrectFlightIDisdiscoveredaftertheunitbeginsoperation,reenterthecorrectFlightID
using the same procedure.
Figure 4-43 Timer/References Window, Entering Flight ID
Flight ID
PFD Entry