Pilot's Guide

Table Of Contents
190-00498-08 Rev. A
Garmin G1000 Pilot’s Guide for Cessna Nav III
55
FLIGHT INSTRUMENTS
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
Pressure setting flashes during climb above
transition altitude if the STD BARO Softkey
has not been pressed.
Pressure setting flashes during descent below
transition altitude to indicate setting has not
been changed from STD BARO.
Figure 2-10 Baro Transition Alert
(AUX - System Setup Page)
VERTICAL SPEED INDICATOR (VSI)
The Vertical Speed Indicator (VSI) displays the aircraft vertical speed on a fixed scale with labels at 1000 and
2000 fpm and minor tick marks every 500 fpm (Figure 2-11). Digits appear in the pointer when the climb or
descent rate is greater than 100 fpm. If the rate of ascent/descent exceeds 2000 fpm, the pointer appears at the
edge of the tape and the rate appears inside the pointer.
A magenta chevron is displayed as the Required Vertical Speed Indication (RVSI) for reaching a VNV Target
Altitude once the “TOD [Top of Descent] within 1 minute” alert has been generated. See the Flight Management
and AFCS sections for details on VNV features, and refer to Section 2.2, Supplemental Flight Data, for more
information about VNV indications on the PFD.