Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-12 Rev. A
8-7
SECTION 8 – FLIGHT PLANNING
5) Turn either FMS Knob to highlight an empty or
existing flight plan.
6) Press the IMPORT Softkey; or press the MENU
Key, select “Import Flight Plan”, and press the ENT
Key.
If an empty slot is selected, a list of the
available flight plans on the SD card will be
displayed.
Or :
If an existing flight plan is selected, an “Over-
write existing flight plan? OK or CANCEL”
prompt is displayed. Press the ENT Key to
choose to overwrite the selected flight plan
and see the list of available flight plans on
the SD card. If overwriting the existing flight
plan is not desired, select “CANCEL” using the
FMS Knob, press the ENT Key, select another
flight plan slot, and press the IMPORT Softkey
again.
Figure 8-13 List of Flight Plans to Import
7) Turn the small FMS Knob to highlight the desired
flight plan for importing.
8) Press the ENT Key to initiate the import.
Figure 8-14 Import Successful
9) Press the ENT Key again to confirm the import.
8.9 ENTER AN AIRWAY IN A FLIGHT
PLAN
1) Press the FPL Key to display the active flight plan
or display a stored flight plan.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the waypoint
before which the airway is to be entered.
Figure 8-15 Airway Insertion Point
4) Turn the small FMS Knob to display the Waypoint
Information Window and begin entering the desired
airways entry point.