Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-12 Rev. A
13-28
SECTION 13 – ANNUNCIATIONS
& ALERTS
Flight Plan Import/Export Results Description
‘Too many points. Flight plan truncated.’ The flight plan on the SD card contains more waypoints than the system
can support. The flight plan was imported with as many waypoints as
possible.
‘Some waypoints not loaded. Waypoints
locked.’
The flight plan on the SD card contains one or more waypoints that the
system cannot find in the navigation database. The flight plan has been
imported, but must be edited within the system before it can be activated
for use.
‘User waypoint database full. Not all loaded.’ The flight plan file on the SD card contains user waypoints. The quantity
of stored user waypoints has exceeded system capacity, therefore not all
the user waypoints on the SD card have been imported. Any flight plan
user waypoints that were not imported are locked in the flight plan. The
flight plan must be edited within the system before it can be activated for
use.
‘One or more user waypoints renamed.’ One or more imported user waypoints were renamed when imported due
to naming conflicts with waypoints already existing in the system.
‘Flight plan successfully exported.’ The stored flight plan was successfully exported to the SD card.
‘Flight plan export failed.’ The stored flight plan was not successfully exported to the SD card. The
SD card may not have sufficient available memory or the card may have
been removed prematurely.