Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-12 Rev. A
1-9
SECTION 1
SYSTEM OVERVIEW
1.3 MFD SOFTKEYS
Figure 1-5 MFD Softkeys
BACK
RST FUEL
SYSTEM
ENGINE
LEAN
ENGINE
MAP
DCLTR
ENGINE
LEAN
BACK SYSTEM
TRAFFIC
TOPO
BACK
TERRAIN
DCLTR-2
DCLTR-3
DCLTR-1
Press the BACK Softkey on this
level to return to the top softkey level.
CHKLIST
EXIT
EMERGCY
ENGINE
CHECK
The CHECK Softkey changes to UNCHECK when the checklist
item is already checked.
(optional)
BACK
SYSTEM
LEAN
ENGINE
Press the ENGINE or BACK Softkey to
return to the default Engine Page level.
ASSIST
CYL SLCT
GAL REM
STRMSCP
NEXRAD
XM LTNG
(optional)
SHW CHRT
(optional)
AIRWAYS
AIRWY LO
AIRWAY HI
AIRWY ON
(Default softkey
is dependant on
the selection made
in the map setup
options)
BACK
-10 GAL
SYSTEM
ENGINE
LEAN
-1 GAL
XX GAL
+10 GAL
+1 GAL
XX GAL
Press the ENGINE Softkey to
the default Engine Page level.
X = airframe s
p
ecific values
Press the BACK Softkey to return
to the previous softkey level.
(optional)
or
PRECIP
METAR
LEGEND
PROFILE
or
DL LTNG
(optional)
ENGINE – Pressing this softkey makes available the LEAN
and SYSTEM Softkeys which in turn access the Lean
Page and the System Page, respectively.
MAP – Pressing this softkey enables the following
softkeys:
TRAFFIC – Pressing this softkey displays/removes
Traffic on the Navigation Map.
PROFILE – Pressing this softkey displays/removes
Profile view on the Navigation Map.
TOPO – Pressing this softkey displays or removes
topographic information on the Navigation Map.
TERRAIN – Pressing this softkey displays/removes
terrain and obstacle data on the Navigation Map.
AIRWAYS – Pressing this softkey displays/removes airways
information. The default is dependent on map setup
option selected. Pressing cycles through all airways
displayed (AIRWY ON), low altitude airways only
(AIRWY LO), and high altitude airways only (AIRWY HI).
STRMSCP (optional) – Pressing this softkey displays/
removes Stormscope lightning data on the Navigation
Map.
NEXRAD/PRECIP (optional) – Pressing this softkey
displays/removes precipitation data on the Navigation
Map.
XM LTNG/DL LTNG (optional) – Pressing this softkey
displays/removes XM/DL lightning data on the
Navigation Map.