Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-12 Rev. A
1-7
SECTION 1
SYSTEM OVERVIEW
OPTN 3 – Wind direction arrow with direction
and speed.
OFF – Information not displayed.
DME (optional) – Press to display the DME
Information Window.
BRG1 (bearing) – Press to cycle through the
following Nav sources, making the pointer the
indicator for the corresponding source and
displaying the appropriate information.
NAV1 – Displays NAV1 waypoint frequency or
identifier and DME information in the BRG1
Information Window.
GPS – Displays GPS waypoint identifier and GPS
distance information in the BRG1 Information
Window.
ADF – Displays ADF in the BRG1 Information
Window when an optional ADF is installed.
OFF – Removes the BRG1 Information
Window.
HSI FRMT – Press to display the HSI formatting
softkeys.
360 HSI – Press to display the HSI in a 360
degree format.
ARC HSI – Press to display the HSI in an arc
format.
BRG2 (bearing) – Press to cycle through the
following Nav sources, making the pointer the
indicator for the corresponding source and
displaying the appropriate information.
NAV2 – Displays NAV2 waypoint frequency or
identifier and DME information in the BRG2
Information Window.
GPS – Displays GPS waypoint identifier and GPS
distance information in the BRG2 Information
Window.
ADF – Displays ADF in the BRG2 Information
Window when an optional ADF is installed.
OFF – Removes the BRG2 Information Window.
ALT UNIT – Displays softkeys for setting the
altimeter and BARO settings to metric units:
METERS – When enabled, displays altimeter in
meters.
IN – Press to display the BARO setting as inches
of mercury.
HPA – Press to display the BARO setting as
hectopascals.
STD BARO – Press to set the barometric pressure
to standard pressure.
BACK – Press to return to the previous level softkeys.
ALERTS – Press to display the Alerts Window.
OBS – Press to select OBS Mode on the CDI when
navigating by GPS (only available with active leg).
CDI – Press to change navigation mode on the CDI
between GPS, VOR1, and VOR2.
DME (optional) – Press to display the DME Tuning
Window.