Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-12 Rev. A
1-6
SECTION 1
SYSTEM OVERVIEW
STRMSCP (optional) – Press to display the
Stormscope lightning data on the Inset Map
(within a 200 nm radius of the aircraft).
NEXRAD /PRECIP (optional) – Press to display
NEXRAD weather and coverage information on
the Inset Map or FIS-B/GFDS precipitation
on the Inset Map
XM LTNG/DL LTNG (optional) – Press to display
XM/DL lightning information on the Inset Map.
METAR (optional) – Press to display METAR flags
for the airport symbols on the Inset Map
BACK – Press to return to the previous level softkey
configuration.
Figure 1-3 PFD Configuration Softkeys
Press the BACK Softkey
to return to the top-level softkeys
BRG1 (NAV1)
BRG1 (GPS)
BRG1 (OFF)
DME
ALT UNIT
METERS IN HPA
DME
ALERTS
ALERTS
ALERTS
ALERTS
HSI FRMT
ALERTS
ARC HSI 360 HSI
BRG1 (ADF)
BRG2 (NAV2)
BRG2 (GPS)
BRG2 (OFF)
BRG2 (ADF)
SYN VIS
SYN TERR
HRZN HDG
PATHWAY
APTSIGNS
ALERTS
PFD – Press to display the additional softkeys for
additional configuration of the PFD.
DFLTS – Press to reset default settings on the PFD.
SYN VIS – Displays the softkeys for enabling or
disabling Synthetic Vision features.
PATHWAY – Displays rectangular boxes
representing the horizontal and vertical flight
path of the active flight plan.
SYN TERR – Enables synthetic terrain
depiction.
HRZN HDG – Displays compass heading along
the Zero-Pitch line.
APTSIGNS – Displays position markers for
airports within approximately 15 nm of the
current aircraft position. Airport identifiers
are displayed when the airport is within
approximately 9 nm.
WIND – Displays softkeys to select wind data
parameters.
OPTN 1 – Wind direction arrows with headwind
and crosswind components.
OPTN 2 – Wind direction arrow and speed.