Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-12 Rev. A
SECTION 11 – ADDITIONAL
FEATURES
11-25
Figure 11-36 Video Display Softkeys
Pressing the BACK Softkey returns
to the Previous Level Softkeys.
SAT -
MAP ENGINE SETUP VID ZM+ VID ZM-
HIDE MAP
CNTRST - BRIGHT -
SAT +
RESET
BACK
CNTRST +
BRIGHT +
INPUT
MAP ACTV
VID ACTV
Selecting video menu options:
1) While viewing the AUX - VIDEO Page press the
MENU Key to display the Page Menu OPTIONS.
2) Turn the large FMS Knob to highlight the desired
video adjustment option and press the ENT Key.
Once the ENT key is pressed on any option, the page
menu closes and returns to the AUX - VIDEO Page.
Video Setup
Video brightness, contrast, and saturation may be
adjusted be selecting the setup function. While viewing
the setup function softkeys, after 45 seconds of softkey
inactivity, the system reverts to the AUX - VIDEO Page
softkeys.
Adjusting the video settings:
1) With the AUX-VIDEO Page displayed, press the
SETUP Softkey.
2) Press the BRIGHT - or BRIGHT +, to adjust display
brightness in five percent increments from 0 to
100%.
3) Press the CNTRST- or CNTRST +, to adjust display
contrast in five percent increments from 0 to
100%.
4) Press the SAT - or SAT +, to adjust display
saturation five percent increments from 0 to
100%.
5) If desired, return the display to the default settings
by pressing the RESET Softkey.
6) Press the BACK Softkey to return to the previous
softkey level.
Display Selection
Pressing the HIDE MAP Softkey removes the map
and displays video on the full screen. The softkey label
changes to grey with black characters. Pressing the HIDE
MAP Softkey again restores the map view and the small
video image. The softkey label returns to white characters
on a black background.
Input Selection
While on the AUX - VIDEO Page, press the INPUT
Softkey to select the EVS or AUX video source.