Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-12 Rev. A
10-24
SECTION 10 – HAZARD
AVOIDANCE
Traffic Advisory Systems (Optional)
GTS 800 Traffic System (Optional)
Testing the Traffic System:
1) Turn the large FMS Knob to select the Map Page
Group.
2) Turn the small FMS Knob to select the Traffic Map
Page.
3) Turn the Range knob to set the range to 2/6 nm to
allow for proper test pattern display.
4) Press the TEST Softkey.
Or:
1) Press the MENU Key and turn the small FMS knob
to select ‘Test Mode’.
2) Press the ENT Key.
Test Mode
Annunciation
Proximity Traffic at 1 o’clock, Distance
3.6 nm, 1000’ Below, Descending
Non-Threat Traffic at
11 o’clock, Distance 3.6
nm, 1000’ Above, Level
Operating
Mode
TA at 9 o’clock, Distance 2.0
nm, 200’ Below, Climbing
Figure 10-31 Test Mode
Displaying traffic on the Traffic Map Page:
1) Turn the large FMS Knob to select the Map Page
Group.
2) Turn the small FMS Knob to select the Traffic Map
Page.
3) Press the OPERATE Softkey to begin displaying
traffic. OPERATING is displayed in the Traffic mode
field.
4) Press the STANDBY Softkey to place the system
in the Standby mode. STANDBY is displayed in the
Traffic Mode field.
5) Turn the RANGE Knob clockwise to display a larger
area or counter-clockwise to display a smaller area.
Non-Threat Traffic,
2500’ Above,
Descending
Traffic Advisory, 500’
Below, Climbing
Non-Threat
Traffic, Altitude
Not Reported
“No Bearing” Traffic
(Bearing Undetermined),
Distance 4.0 nm, 500’
Above, Descending
Proximity Traffic,
900’ Above, Level,
Flight ID Displayed
Traffic Advisory
Off-Scale, 400’
Below, Level
Figure 10-32 Traffic Map