Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-12 Rev. A
8-4
SECTION 8 – FLIGHT PLANNING
7) If desired, change the storage method of the
waypoint to “TEMPORARY” or “NORMAL” by
moving the cursor to “TEMPORARY” and selecting
the ENT Key to check or uncheck the box.
8) Press the FMS Knob to remove the flashing cursor.
9) Press the GO BACK Softkey to return to the map
page.
Delete a User Waypoint
1) With the User Defined Waypoint Page displayed ,
press the FMS Knob to activate the cursor.
2) Turn the large FMS Knob to the place the cursor
in the ‘USER WAYPOINT LIST’ field.
3) Turn the small FMS Knob to highlight the desired
waypoint.
4) Press the DELETE Softkey.
5) The message ‘Would you like to delete the user
waypoint?’ is displayed. With ‘YES’ highlighted,
press the ENT Key.
NOTE: The option to ‘Delete All User Waypoints’
is not available while the aircraft is in flight.
8.2 VIEWING THE ACTIVE FLIGHT PLAN
Press the FPL Key.
Figure 8-2 Active Flight Plan Window on the PFD
Figure 8-3 Active Flight Plan Page on the MFD
8.3 ACTIVATE A STORED FLIGHT PLAN
1) Press the FPL Key and turn the small FMS Knob to
display the Flight Plan Catalog Page.
Figure 8-4 Flight Plan Catalog Page
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the desired
flight plan and press the ACTIVE Softkey.
4) With ‘OK’ highlighted, press the ENT Key to activate
the flight plan. To cancel the flight plan activation,
turn the large FMS Knob to highlight ‘CANCEL’ and
press the ENT Key.