Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-11 Rev. A
1-7
SECTION 1
SYSTEM OVERVIEW
BRG1 (bearing) – Press to cycle through the
following Nav sources, making the pointer the
indicator for the corresponding source and
displaying the appropriate information.
NAV1 – Displays NAV1 waypoint frequency or
identifier and DME information in the BRG1
Information Window.
GPS – Displays GPS waypoint identifier and GPS
distance information in the BRG1 Information
Window.
ADF – Displays ADF in the BRG1 Information
Window when an optional ADF is installed.
OFF – Removes the BRG1 Information
Window.
HSI FRMT – Press to display the HSI formatting
softkeys.
360 HSI – Press to display the HSI in a 360
degree format.
ARC HSI – Press to display the HSI in an arc
format.
BRG2 (bearing) – Press to cycle through the
following Nav sources, making the pointer the
indicator for the corresponding source and
displaying the appropriate information.
Press the BACK Softkey to return
to the top-level softkeys.
Press the BACK Softkey to return
to the previous softkey level.
ALERTS
ALERTS
DME
ALERTS
Figure 1-5 XPDR (Transponder) Softkeys
NAV2 – Displays NAV2 waypoint frequency or
identifier and DME information in the BRG2
Information Window.
GPS – Displays GPS waypoint identifier and GPS
distance information in the BRG2 Information
Window.
ADF – Displays ADF in the BRG2 Information
Window when an optional ADF is installed.
OFF – Removes the BRG2 Information
Window.
ALT UNIT – Displays softkeys for setting the
altimeter and BARO settings to metric units:
METERS – When enabled, displays altimeter in
meters.
IN – Press to display the BARO setting as inches
of mercury.
HPA – Press to display the BARO setting as
hectopascals.
STD BARO – Press to set the barometric pressure
to standard pressure.
BACK – Press to return to the previous level softkeys.
ALERTS – Press to display the Alerts Window.
OBS – Press to select OBS Mode on the CDI when
navigating by GPS (only available with active leg).