Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-11 Rev. A
10-12
SECTION 10 – HAZARD
AVOIDANCE
Figure 10-18 Terrain-SVS Page (360˚ View)
Figure 10-19 Terrain-SVS Page (ARC View)
Enable/Disable Aviation Data
1) While the TERRAIN-SVS Page is displayed, press
the MENU Key.
2) Turn the small FMS Knob to select “Show (or Hide)
Aviation Data”.
3) Press the ENT Key.
Figure 10-20 Terrain-SVS Page Menu
TERRAIN-SVS Alerts
Alerts are issued when flight conditions meet parameters
that are set within TERRAIN-SVS software algorithms.
TERRAIN-SVS alerts typically employ a CAUTION or a
WARNING alert severity level, or both. When an alert
is issued, visual annunciations are displayed and aural
alerts are simultaneously issued. The following tables
show TERRAIN-SVS alert types with corresponding
annunciations and aural messages and system status
annuciations.
When an alert is issued, annunciations appear on the
PFD and MFD. The TERRAIN-SVS Alert Annunciation is
shown to the upper left of the Altimeter on the PFD and
below the Terrain Legend on the MFD. If the TERRAIN-
SVS Page is not displayed at the time, a pop-up alert
appears on the MFD. To acknowledge the pop-up alert:
• PresstheCLR Key (returns to the currently viewed
page), or
• Press the ENT Key (accesses the TERRAIN-SVS
Page)