Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-11 Rev. A
8-12
SECTION 8 – FLIGHT PLANNING
11) The flashing cursor moves to the barometric
pressure field. Turn the FMS Knobs to enter the
altimeter barometric pressure setting. Press the
ENT Key when finished.
12) The flashing cursor moves to the total air
temperature field. Turn the FMS Knobs to enter
the total air temperature. Press the ENT Key when
finished.
8.22 EXPORT A FLIGHT PLAN TO AN SD
CARD
NOTE: See the Annunciations & Alerts section
for flight plan export message descriptions.
1) Insert the SD card into the top card slot on the
MFD.
2) Press the FPL Key to display the Active Flight Plan
Page on the MFD.
3) Turn the small FMS Knob to select the Flight Plan
Catalog Page.
4) Press the FMS Knob to activate the cursor.
5) Turn the large FMS Knob to highlight the flight
plan to be exported.
6) Press the EXPORT Softkey.
Figure 8-24 Stored Flight Plan to be
Exported & Exported Flight Plan Name
7) Press the ENT Key to confirm the export.
Figure 8-25 Export Successful