Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-11 Rev. A
8-10
SECTION 8 – FLIGHT PLANNING
8.17 INVERT AND ACTIVATE A STORED
FLIGHT PLAN
1) From the Flight Plan Catalog Page, press the FMS
Knob to activate the cursor.
2) Turn the large FMS Knob to highlight the desired
flight plan.
3) Press the INVERT Softkey. ‘Invert and activate
stored flight plan?’ is displayed.
4) With ‘OK’ highlighted, press the ENT Key. The
selected flight plan is now inverted and activated.
The original flight plan remains intact in its flight
plan catalog storage location.
8.18 COPY A FLIGHT PLAN
1) From the Flight Plan Catalog press the FMS Knob
to activate the cursor
2) Turn the large FMS Knob to highlight the flight plan
to be copied.
3) Press the COPY Softkey.
4) A ‘Copy to flight plan #?’ confirmation window is
displayed. With ‘OK’ highlighted, press the ENT Key
to copy the flight plan. To cancel, turn the large
FMS Knob to highlight ‘CANCEL’ and press the ENT
Key.
8.19 DELETE A FLIGHT PLAN
1) From the Flight Plan Catalog Page, press the FMS
Knob to activate the cursor.
2) Turn the large FMS Knob to highlight the flight plan
to be deleted.
3) Press the DELETE Softkey.
4) A ‘Delete flight plan #?’ confirmation window is
displayed. With ‘OK’ highlighted, press the ENT
Key to delete the flight plan. To cancel, turn the
large FMS Knob to highlight ‘CANCEL’ and press
the ENT Key.
NOTE: The option to delete all stored flight plans
is not available while the aircraft is in flight.
8.20 GRAPHICAL FLIGHT PLAN CREATION
1) Press the FPL Key on the MFD to display the Active
Flight Plan Page.
2) Press the Joystick to activate the map pointer. Use
the Joystick to move the pointer to the desired
point on the map to be inserted as a waypoint in
the flight plan.
3) Press the LD WPT Softkey. The selected waypoint is
inserted at the end of the flight plan. The default
user waypoint naming is USR000, USR001, USR002
and so on.
4) If the selected waypoint is to be placed elsewhere in
the flight plan, press the FMS Knob to activate the
cursor. Waypoints are inserted ABOVE the cursor.
5) After placing the cursor at the desired point in the
list of waypoints, press the LD WPT Softkey.
6) To change the user waypoint name, follow the
procedure for modifying a user waypoint.
8.21 TRIP PLANNING
1) Turn the large FMS Knob to select the ‘AUX’ page
group.
2) Turn the small FMS Knob to select TRIP
PLANNING.
3) The current page mode is displayed at the top of the
page: ‘AUTOMATIC’ or ‘MANUAL’. To change the
page mode, press the AUTO or MANUAL Softkey.