Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-11 Rev. A
8-8
SECTION 8 – FLIGHT PLANNING
5) When the desired entry point is entered, press the
ENT Key.
Figure 8-17 Airway Entry Point Loaded
6) Turn the small FMS Knob to display the Waypoint
Information Window and begin entering the desired
airway identifier.
Figure 8-18 Enter Airway Identifier
7) When the desired airway is entered, press the LD
AIRWY Softkey.
8) Turn either FMS Knob to scroll through the list of
available exit points.
Figure 8-19 Select Desired Exit Point
9) With the desired exit point highlighted, press the
ENT Key.
10) With ‘LOAD?’ highlighted, press the ENT Key.
Figure 8-20 Airway Added to Flight Plan
8.10 LOAD A DEPARTURE
See the Procedures section for a discussion on loading
and activating departure procedures.
8.11 LOAD AN ARRIVAL
See the Procedures section for a discussion on loading
and activating arrival procedures.