Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-11 Rev. A
8-3
SECTION 8 – FLIGHT PLANNING
8) The cursor moves to the ‘REFERENCE WAYPOINTS’
field. With the first waypoint name highlighted, use
the FMS Knobs to enter the desired waypoint name.
Waypoints may also be selected as follows:
a) When a flight plan is active, turning the small
FMS Knob to the left will display a list of the
flight plan waypoints.
b) Turn the large FMS Knob to select the desired
waypoint.
c) Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a
flight plan waypoint list is displayed.
b) Turn the small FMS Knob to the right to dis-
play the ‘NRST’ airports to the aircraft’s current
position.
c) Turn the large FMS Knob to select the desired
waypoint.
d) Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a
flight plan waypoint list is displayed.
b) Turn the small FMS Knob to the right to dis-
play the ‘RECENT’ waypoints.
c) Turn the large FMS Knob to select the desired
waypoint.
d) Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a
flight plan waypoint list is displayed.
b) Turn the small FMS Knob to the right to dis-
play the ‘USER’ waypoints.
c) Turn the large FMS Knob to select the desired
waypoint.
d) Press the ENT Key.
9) Press the ENT Key. The cursor is displayed in the
‘RAD’ (radial) field. Enter the desired radial from
the reference waypoint.
10) Press the ENT Key.
11) The cursor is now displayed in the ‘DIS’ (distance)
field. Enter the desired distance from the reference
waypoint.
12) Press the ENT Key.
13) Press the FMS Knob to remove the flashing
cursor.
Delete a User Waypoint
1) With the User Defined Waypoint Page displayed ,
press the FMS Knob to activate the cursor.
2) Turn the large FMS Knob to the place the cursor
in the ‘USER WAYPOINT LIST’ field.
3) Turn the small FMS Knob to highlight the desired
waypoint.
4) Press the DELETE Softkey.
5) The message ‘Would you like to delete the user
waypoint?’ is displayed. With ‘YES’ highlighted,
press the ENT Key.
NOTE: The option to ‘Delete All User Waypoints’
is not available while the aircraft is in flight.