Manualshelf

Cockpit Reference Guide

ManualsBrandsGarmin ManualsFlight DecksGarmin Software Version 0563.18
131132133134135136137138139140
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-11 Rev. A
8-1
SECTION 8 – FLIGHT PLANNING
SECTION 8: FLIGHT PLANNING
The following discussions pertain to the Multi Function
Display, unless otherwise indicated.
8.1 USER DEFINED WAYPOINTS
Figure 8-1 User WPT Information Page
Select the User WPT Information Page
1)
Turn the large
FMS
Knob to select the ‘WPT’ page
group.
2)
Turn the small
FMS
Knob to select USER DEFINED
WAYPOINTS.
Create a New User Waypoint Defined by
Latitude & Longitude
1)
With the User Defined Waypoint Page displayed,
press the NEW Softkey. A waypoint is created at
the current aircraft position.
2)
Enter the desired waypoint name.
3)
Press the ENT Key.
4)
The cursor is now in the ‘WAYPOINT TYPE’ field.
If desired, the waypoint can be made temporary
(deleted automatically when the system is turned
off). If the waypoint is to remain in the system,
proceed to step 7.
a) Turn the large FMS Knob one click to the left
to highlight ‘TEMPORARY’.
b) Press the ENT Key to place a check-mark in
the box.
5)
The cursor is now in the ‘WAYPOINT TYPE’ field.
Turn the small FMS Knob to display a list of
waypoint types.
6)
Turn the small FMS Knob to select LAT/LON
(latitude and longitude).
7)
Press the ENT Key.
Create a New User Waypoint Defined by
Radials from Other Waypoints
1)
With the User Defined Waypoint Page displayed,
press the NEW Softkey. A waypoint is created at
the current aircraft position.
2)
Enter the desired waypoint name.
3)
Press the ENT Key.
4)
The cursor is now in the ‘WAYPOINT TYPE’ field.
If desired, the waypoint can be made temporary
(deleted automatically when the system is turned
off). If the waypoint is to remain in the system,
proceed to step 7.
a) Turn the large FMS Knob one click to the left
to highlight ‘TEMPORARY’.
b) Press the ENT Key to place a check-mark in
the box.
5)
The cursor is now in the ‘WAYPOINT TYPE’ field.
Turn the small FMS Knob to display a list of
waypoint types.
6)
Turn the small FMS Knob to select RAD/RAD (radial/
radial).
7)
Press the ENT Key.