Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-08 Rev. A
SECTION 6 – AUTOMATIC
FLIGHT CONTROL
6-32
Flying a WAAS precision approach:
1) Arm flight director modes for a precision
approach:
a) Make sure the navigation source is set to GPS
(use CDI Softkey to change navigation source).
b) Load the Runway 35R LPV approach for KCOS
into the flight plan.
2) Press the APR Key once clearance for approach has
been acquired. GPS Approach Mode is activated
and Glidepath Mode is armed.
3) Once the glidepath is captured, Glidepath Mode
becomes active. The flight director now provides
guidance to the Missed Approach Point.
4) There are two options available at this point, as the
autopilot flies the approach:
• Push the AP DISC Switch at the Decision
height and land the aircraft.
• Use the GA Switch to execute a missed
approach.
4
GPS APR/
G
P
M
ode
FALUR
1
2
3
GPS NA
V Mode
KCOS
HABUK
PYNON
CEGIX
Figure 6-38 LPV Approach to KCOS