Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-08 Rev. A
2-11
SECTION 2
FLIGHT INSTRUMENTS
Bearing Pointers and Information Windows
Pressing the PFD Softkey provides access to the BRG1
and BRG2 Softkeys. The BRG1 pointer is a single line
pointer. The BRG2 pointer is a double line pointer. Press
the BRG1 or BRG2 Softkey to cycle through selecting
NAV1/2, GPS, or ADF for display using the corresponding
pointer.
Bearing 2
Pointer
Bearing 1
Information
Window
Bearing 1
Pointer
Bearing 2
Information
Window
Figure 2-25 HSI with Bearing Information
DME
Information
Window
CDI
Distance to
Bearing Source
Waypoint
Identifier
Bearing
Source
Pointer
Icon
Figure 2-26 BRG1 Information Window
Distance to
Bearing Source
Waypoint
Identifier
Pointer
Icon
Bearing
Source
Figure 2-27 BRG2 Information Window
DME (optional)
To display the DME Information Window, press the
PFD Softkey followed by the DME Softkey.
Figure 2-28 DME Information Window
Navigation Source
Change CDI navigation sources:
1) Press the CDI Softkey to change from GPS to
VOR1/LOC1.
2) Press the CDI Softkey again to change from VOR1/
LOC1 to VOR2/LOC2.
3) Press the CDI Softkey a third time to return to
GPS.
When using GPS as the navigation source, the following
may appear:
• LOI - GPS position integrity is inadequate for the
current procedure being flown. If GPS is being
used as primary navigation, and LOI is annunciated,
other means of primary navigation is required, such
as VHF. LOI is also displayed during GPS position
initialization.
• WARN – GPS detects a position error.