Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-08 Rev. A
1-8
SECTION 1
SYSTEM OVERVIEW
IDENT – Press to provide special aircraft position
identification to Air Traffic Control (ATC).
TMR/REF – Press to display the Timer/References
Window.
NRST – Press to display the Nearest Airports
Window.
ALERTS – Press to display the Alerts Window.
1.3 MFD SOFTKEYS
ENGINE – Pressing this softkey makes available the LEAN
and SYSTEM Softkeys which in turn access the Lean
Page and the System Page, respectively.
Figure 1-6 MFD Softkeys
BACK
RST FUEL
SYSTEM
ENGINE
LEAN
ENGINE
MAP
DCLTR
BACK
SYSTEM
LEAN
ENGINE
ENGINE
LEAN
BACK
SYSTEM
Press the ENGINE or BACK Softkey to
return to the default Engine Page level.
TRAFFIC
TOPO
BACK
TERRAIN
DCLTR-2
DCLTR-3
DCLTR-1
Press the BACK Softkey on this
level to return to the top softkey level.
CHKLIST
ASSIST
CYL SLCT
EXIT
EMERGCY
ENGINE
DONE
The DONE Softkey changes to UNDO when the checklist
item is already checked.
(optional)
BACK
-10 GAL
SYSTEM
ENGINE
LEAN
GAL REM
-1 GAL
XX GAL
+10 GAL
+1 GAL
XX GAL
Press the ENGINE Softkey to
the default Engine Page level.
X = airframe specific values
STRMSCP
NEXRAD
XM LTNG
(optional) (optional)
(optional)
SHW CHRT
(optional
)
AIRWAYS
AIRWY LO
AIRWAY HI
AIRWY ON
(Default softkey
is dependant on
the selection made
in the map setup
options)
Press the BACK Softkey to return
to the previous softkey level.
MAP – Pressing this softkey enables the following
softkeys:
TRAFFIC – Pressing this softkey displays/removes
Traffic on the Navigation Map.
TOPO – Pressing this softkey displays or removes
topographic information on the Navigation Map.
TERRAIN – Pressing this softkey displays/removes
terrain and obstacle data on the Navigation Map.