Cockpit Reference Guide
Table Of Contents
- Section 1: System Overview
- Section 2: Flight Instruments
- Section 3: Engine Indication System (EIS)
- Section 4: NAV/COM and Transponder
- Section 5: Audio Panel
- Section 6: Automatic Flight Control
- Section 7: Navigation
- 7.1 Navigation Map Page
- 7.2 Direct-to Navigation
- 7.3 Navigating an Example Flight Plan
- 7.4 Airport Information
- 7.5 Intersection Information
- 7.6 NDB Information
- 7.7 VOR Information
- 7.8 User Waypoint Information Page
- 7.9 Nearest Airports
- 7.10 Nearest Intersections
- 7.11 Nearest NDB
- 7.12 Nearest VOR
- 7.13 Nearest User Waypoint
- 7.14 Nearest Frequencies
- 7.15 Nearest Airspaces
- Section 8: Flight Planning
- 8.1 User Defined Waypoints
- 8.2 Viewing the Active Flight Plan
- 8.3 Activate a Stored Flight Plan
- 8.4 Activate a Flight Plan Leg
- 8.5 Stop Navigating a Flight Plan
- 8.6 Invert Active Flight Plan
- 8.7 Create a New Flight Plan
- 8.8 Enter an Airway in a Flight Plan
- 8.9 Load a Departure
- 8.10 Load an Arrival
- 8.11 Load an Approach
- 8.12 Remove a Departure, Arrival, Approach, or Airway from a Flight Plan
- 8.13 Store a Flight Plan
- 8.14 Edit a Stored Flight Plan
- 8.15 Delete a Waypoint from the Flight Plan
- 8.16 Invert and Activate a Stored Flight Plan
- 8.17 Copy a Flight Plan
- 8.18 Delete a Flight Plan
- 8.19 Graphical Flight Plan Creation
- 8.20 Trip Planning
- Section 9: Procedures
- Section 10: Hazard Avoidance
- 10.1 Customizing the Hazard Displays on the Navigation Map
- 10.2 STORMSCOPE® (Optional)
- 10.3 XM Weather (Service Optional)
- 10.4 Traffic Systems
- 10.5 Terrain and Obstacle Proximity
- 10.6 Terrain Awareness & Warning System (TAWS) Display (Optional)
- Displaying Terrain on the TAWS Page
- Enable/Disable Aviation Data
- TAWS Inhibit
- Manual System Test
- Forward Looking Terrain Avoidance (FLTA)
- Premature Descent Alert (PDA)
- Excessive Descent Rate Alert (EDR)
- Negative Climb Rate After TakeoffAlert (NCR)
- “Five-Hundred” Aural Alert
- Displaying Terrain and Obstacles on the Navigation Map
- Pop-up Alerts
- TAWS Alerts Summary
- Alert Annunciations
- Section 11: Abnormal Operation
- Section 12: Annunciations & Alerts
- 12.1 Alert Level Definitions
- 12.2 NAV III Aircraft Alerts
- 12.3 CO Guardian Messages
- 12.4 AFCS Alerts
- 12.5 TAWS Alerts
- 12.6 Other G1000 Aural Alerts
- 12.7 G1000 System Annunciations
- 12.8 G1000 System Message Advisories
- MFD & PFD Message Advisories
- Database Message Advisories
- GMA 1347 Message Advisories
- GIA 63 Message Advisories
- GIA 63W Message Advisories
- GEA 71 Message Advisories
- GTX 33 Message Advisories
- GRS 77 Message Advisories
- GMU 44 Message Advisories
- GDL 69A Message Advisories
- GDC 74A Message Advisories
- Miscellaneous Message Advisories
- Index

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-08 Rev. A
8-7
SECTION 8 – FLIGHT PLANNING
8.14 EDIT A STORED FLIGHT PLAN
1)
Press the
FPL
Key and turn the small
FMS
Knob to
display the Flight Plan Catalog Page.
2)
Press the
FMS
Knob to activate the cursor.
3)
Turn the large
FMS
Knob to highlight the desired
flight plan and press the
ENT
Key.
4)
Turn the large
FMS
Knob to place the cursor in the
desired locations for entering changes.
5)
Turn the
FMS
Knobs to make the desired changes,
then press the
ENT
Key.
6)
Press the
FMS
Knob to return to the Flight Plan
Catalog Page.
8.15 DELETE A WAYPOINT FROM THE
FLIGHT PLAN
1)
With either the Active or Stored Flight Plan
displayed, press the
FMS
Knob to activate the
cursor.
2)
Turn the large
FMS
Knob to select the waypoint to
be deleted.
3)
Press the
CLR
Key to display a ‘REMOVE (Wpt
Name)’ confirmation window.
Figure 8-20 Remove Waypoint Confirmation
4)
With ‘OK’ highlighted, press the
ENT
Key to remove
the waypoint. To cancel the delete request, turn the
large
FMS
Knob to highlight ‘CANCEL’ and press
the
ENT
Key.
5)
Once all changes have been made, press the
FMS
Knob to remove the cursor.
8.16 INVERT AND ACTIVATE A STORED
FLIGHT PLAN
1)
From the Flight Plan Catalog Page, press the
FMS
Knob to activate the cursor.
2)
Turn the large
FMS
Knob to highlight the desired
flight plan.
3)
Press the
INVERT
Softkey. ‘Invert and activate
stored flight plan?’ is displayed.
4)
With ‘OK’ highlighted, press the
ENT
Key. The
selected flight plan is now inverted and activated.
The original flight plan remains intact in its flight
plan catalog storage location.
8.17 COPY A FLIGHT PLAN
1)
From the Flight Plan Catalog press the
FMS
Knob
to activate the cursor
2)
Turn the large
FMS
Knob to highlight the flight plan
to be copied.
3)
Press the
COPY
Softkey.
4)
A ‘Copy to flight plan #?’ confirmation window is
displayed. With ‘OK’ highlighted, press the
ENT
Key
to copy the flight plan. To cancel, turn the large
FMS
Knob to highlight ‘CANCEL’ and press the
ENT
Key.










