Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-08 Rev. A
SECTION 7 – NAVIGATION
7-28
2) Press the ENT Key. The selected VOR frequency is
placed in the NAV standby frequency field.
3) Press the FMS Knob to remove the flashing
cursor.
7.13 NEAREST USER WAYPOINT
Figure 7-63 Nearest User Waypoints Page
Select the Nearest User Waypoint Page
1) Turn the large FMS Knob to select the ‘NRST’ page
group.
2) Turn the small FMS Knob to select the fifth
rectangular page icon.
Select a Nearest User Waypoint
1) With the Nearest User Waypoint Page displayed,
press the
FMS Knob to activate the cursor. If
any previously entered User Waypoints are within
200 nm, they are displayed with the closest listed
first.
2) Turn either FMS Knob to select the desired waypoint.
The remaining information on the Nearest User
Waypoint Page pertains to the selected Nearest
User Waypoint.
3) Press the FMS Knob to remove the flashing
cursor.
7.14 NEAREST FREQUENCIES
Figure 7-64 Nearest Frequencies Page
Select the Nearest Frequencies Page
1) Turn the large FMS Knob to select the ‘NRST’ page
group.
2) Turn the small FMS Knob to select the sixth
rectangular page icon.
Select and Load the Nearest ARTCC, FSS, or
Weather Frequency
1) With the Nearest Frequencies Page displayed, press
the ARTCC, FSS, or WX Softkey to place the cursor
in the appropriate field.
2) Turn the FMS Knobs to select the desired facility or
frequency.