Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-08 Rev. A
SECTION 7 – NAVIGATION
7-22
Select an Airport from the Active Flight Plan
1) With the Airport Information Page displayed, press
the FMS Knob to activate the cursor.
2) Turn the small FMS Knob to the left to display a list
of flight plan airports as shown in Figure 7-52.
Figure 7-52 Flight Plan Airport List
3) Turn the large FMS Knob to select the desired
airport.
4) Press the ENT Key.
Select a Nearest Airport
1) With the Airport Information Page displayed, press
the FMS Knob to activate the cursor.
2) Turn the small FMS Knob to the left. Initially, a
flight plan airport list is displayed as in Figure 7-52.
The list is populated only when navigating a flight
plan.
Figure 7-53 Nearest Airport List
3) Turn the small FMS Knob to the right to display the
‘NRST’ airports to the aircraft’s current position as
shown in Figure 7-53.
4) Turn the large FMS Knob to select the desired
airport.
5) Press the ENT Key.
Select a Recently Entered Airport Identifier
1) With the Airport Information Page displayed, press
the FMS Knob to activate the cursor.
2) Turn the small FMS Knob to the left. Initially, a flight
plan waypoint list is displayed as in Figure 7-52.
The list is populated only when navigating a flight
plan.
3) Turn the small FMS Knob to the right to display the
‘RECENT’ airports as shown in Figure 7-54.
Figure 7-54 Recently Entered Airports List
4) Turn the large FMS Knob to select the desired
airport.
5) Press the ENT Key.
Select an Airport by Facility Name or City
Location
1) With the Airport Information Page displayed, press
the FMS Knob to activate the cursor.
2) Turn the large FMS Knob to the right to select the
facility name or location (city) field.
3) Enter the desired facility name or city.
5) Press the ENT Key. If there are duplicate names
in the database, a list is displayed from which to
choose the desired location.
6) To remove the flashing cursor, press the FMS
Knob.