Cockpit Reference Guide
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-07 Rev. A
8-8
SECTION 8 – FLIGHT PLANNING
8.18 DELETE A FLIGHT PLAN
1)
From the Flight Plan Catalog Page, press the
FMS
Knob to activate the cursor.
2)
Turn the large
FMS
Knob to highlight the flight
plan to be deleted.
3)
Press the
DELETE
Softkey.
4)
A ‘Delete flight plan #?’ confirmation window is
displayed. With ‘OK’ highlighted, press the
ENT
Key to delete the flight plan. To cancel, turn the
large
FMS
Knob to highlight ‘CANCEL’ and press
the
ENT
Key.
8.19 GRAPHICAL FLIGHT PLAN CREATION
1)
Press the
FPL
Key to display the Active Flight Plan
Page.
2)
Press the
Joystick
to activate the map pointer. Use
the
Joystick
to move the pointer to the desired
point on the map to be inserted as a waypoint
in the flight plan.
3)
Press the
LD WPT
Softkey. The selected waypoint
will be inserted at the end of the flight plan.
The default user waypoint naming is USR000,
USR001, USR002 and so on.
4)
If the selected waypoint is to be placed elsewhere
in the flight plan, press the
FMS
Knob to activate
the cursor. Waypoints are inserted
ABOVE
the
cursor.
5)
After placing the cursor at the desired point in
the list of waypoints, press the
LD WPT
Softkey.
6)
To change the user waypoint name, follow the
procedure for modifying a user waypoint.
8.20 TRIP PLANNING
1)
Turn the large
FMS
Knob to select the ‘AUX’ page
group.
2)
Turn the small
FMS
Knob to select the first
rectangular page icon.
3)
The current page mode is displayed at the top of
the page: ‘AUTOMATIC’ or ‘MANUAL’. To change
the page mode, press the
AUTO
or
MANUAL
Softkey.
Figure 8-21 Trip Planning Page
Starting WPT Ending WPT
4)
For Direct-to planning, press the
WPTS
Softkey
and verify that the starting waypoint field
indicates ‘P.POS’ (present position). If necessary,
press the
MENU
Key and select ‘Set WPT to
Present Position’ to display ‘P.POS’. Press the
ENT
Key and the flashing cursor moves to the ending
waypoint field. Turn the
FMS
Knobs to enter the
identifier of the ending waypoint and press the
ENT
Key to accept the waypoint. OR,