Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-07 Rev. A
SECTION 7 – NAVIGATION
7-7
4) V4 will now be entered into the flight plan.
a) Press the
FMS Knob to activate the cursor.
b) Turn the large FMS Knob to highlight the
desired entry point as shown in Figure 7-13.
The V4 entry will be placed immediately above
the highlighted waypoint.
Figure 7-13 Begin Adding V4 to the Flight Plan
c) Turn the small FMS Knob to display the
Waypoint Information Window. Enter the
desired beginning point for V4 leg, in this
example, Topeka VOR (TOP) will be used as
shown in Figure 7-14.
Figure 7-14 Entering V4 Entry Point
d) Press the ENT Key. TOP is now inserted into
the flight plan as in Figure 7-15.
Figure 7-15 TOP Inserted into the Flight Plan