Pilot's Guide

5-51
GPS NAVIGATION
190-00498-01 Rev. A
Garmin G1000 Pilot’s Guide for the Cessna Nav III
7) Press the ENT Key to accept the new waypoint.
8) Press the FMS Knob to remove the flashing cursor.
Creating user waypoints from the Navigation Map Page:
1) With the Navigation Map Page displayed, push the JOYSTICK to activate the panning function. The map arrow
is displayed at the present aircraft position.
2) After placing the pointer at the desired position, press the ENT Key. The User Waypoint Information Page is now
displayed with the captured position.
3) Enter a waypoint name.
4) Press the ENT Key to accept the selected name. The first reference waypoint field is highlighted.
5) If desired, enter the identifier of the reference waypoint and the radial and distance to the reference waypoint.
6) Press the ENT Key to accept.
7) Press the FMS Knob to remove the flashing cursor.
Modifying a user waypoint:
1) With the User Waypoint Information Page displayed, press the FMS Knob to activate the cursor.
2) Move the cursor to the desired field.
3) Turn the small FMS Knob to make changes.
4) Press the ENT Key to accept the changes.
5) Press the FMS Knob to remove the flashing cursor.