Pilot's Guide

5-31

GPS NAVIGATION

190-00498-01 Rev. A

Garmin G1000 Pilot’s Guide for the Cessna Nav III

Selecting and activating a direct-to destination by entering an identiﬁer:

1) Press the

Direct-to

( )

Key.

2) Enter the destination waypoint identiﬁer (Figure 5-23).

Figure 5-22 Entering an Identiﬁer

3) Press the

ENT

Key to conﬁrm the identiﬁer. The ‘Activate?’ ﬁeld is highlighted (Figure 5-24).

Figure 5-24 Activate Field

Activate Field

4) If no altitude constraint or course is desired, Press the

ENT

Key to activate. To enter an altitude constraint,

proceed to step 5.

5) Turn the large

FMS

Knob to place the cursor over the ‘VNAV’ altitude ﬁeld (Figure 5-25).

Figure 5-25 Entering a Direct-to Altitude Constraint

VNAV

Altitude

Constraint

Field

6) Enter the desired altitude.

7) Press the

ENT

Key. The option to select MSL or AGL is now displayed.