Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
1-7
SECTION 1
SYSTEM OVERVIEW
GND
Press the BACK Softkey
to return to the top level
softkeys
Press the BACK
Softkey
to return to
the top level
softkeys
Figure 1-5 PFD Softkey Flow Chart – 3
IDENT – Press to provide special aircraft
position identification to Air Traffic Control
(ATC).
BKSP – Press to remove numbers entered one
at a time.
BACK – Press to return to the previous level
softkeys.
IDENT – Press to provide special aircraft position
identification to Air Traffic Control (ATC).
BACK – Press to return to the previous level
softkeys.
ALERTS – Press to display the Alerts Window.
IDENT – Press to provide special aircraft position
identification to Air Traffic Control (ATC).
TMR/REF – Press to display the Timer/References
Window.
NRST – Press to display the Nearest Airports
Window.
ALERTS – Press to display the Alerts Window.
1.3 MFD SOFTKEYS
ENGINE – Pressing this softkey makes available the LEAN
and SYSTEM Softkeys which in turn access the Lean
Page and the System Page, respectively.
MAP – Pressing this softkey enables the following
softkeys:
TRAFFIC – Pressing this softkey displays/removes
Traffic on the Navigation Map.
TOPO – Pressing this softkey displays or removes
topographic information on the Navigation Map.
TERRAIN – Pressing this softkey displays/removes
terrain and obstacle data on the Navigation Map.