Cockpit Reference Guide
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
8-6
SECTION 8 – FLIGHT PLANNING
4)
With ‘OK’ highlighted, press the
ENT
Key to
remove the waypoint. To cancel the delete
request, turn the large
FMS
Knob to highlight
‘CANCEL’ and press the
ENT
Key.
5)
Once all changes have been made, press the
FMS
Knob to remove the cursor.
8.15 INVERT AND ACTIVATE A STORED
FLIGHT PLAN
1)
From the Flight Plan Catalog Page, press the
FMS
Knob to activate the cursor.
2)
Turn the large
FMS
Knob to highlight the desired
flight plan.
3)
Press the
INVERT
Softkey. ‘Invert and activate
stored flight plan?’ will be displayed.
4)
With ‘OK’ highlighted, press the
ENT
Key. The
selected flight plan is now inverted and activated.
The original flight plan remains intact in its flight
plan catalog storage location.
8.16 COPY A FLIGHT PLAN
1)
From the Flight Plan Catalog press the
FMS
Knob
to activate the cursor
2)
Turn the large
FMS
Knob to highlight the flight
plan to be copied.
3)
Press the
COPY
Softkey.
4)
A ‘Copy to flight plan #?’ confirmation window is
displayed. With ‘OK’ highlighted, press the
ENT
Key to copy the flight plan. To cancel, turn the
large
FMS
Knob to highlight ‘CANCEL’ and press
the
ENT
Key.
8.17 DELETE A FLIGHT PLAN
1)
From the Flight Plan Catalog Page, press the
FMS
Knob to activate the cursor.
2)
Turn the large
FMS
Knob to highlight the flight
plan to be deleted.
3)
Press the
DELETE
Softkey.
4)
A ‘Delete flight plan #?’ confirmation window is
displayed. With ‘OK’ highlighted, press the
ENT
Key to delete the flight plan. To cancel, turn the
large
FMS
Knob to highlight ‘CANCEL’ and press
the
ENT
Key.
8.18 GRAPHICAL FLIGHT PLAN CREATION
1)
Press the
FPL
Key to display the Active Flight Plan
Page.
2)
Press the
Joystick
to activate the map pointer. Use
the
Joystick
to move the pointer to the desired
point on the map to be inserted as a waypoint
in the flight plan.
3)
Press the
LD WPT
Softkey. The selected waypoint
will be inserted at the end of the flight plan.
The default user waypoint naming is USR000,
USR001, USR002 and so on.
4)
If the selected waypoint is to be placed elsewhere
in the flight plan, press the
FMS
Knob to activate
the cursor. Waypoints are inserted
ABOVE
the
cursor.
5)
After placing the cursor at the desired point in
the list of waypoints, press the
LD WPT
Softkey.
6)
To change the user waypoint name, follow the
procedure for modifying a user waypoint.