Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
SECTION 7 – NAVIGATION
7-16
Figure 7-43 Flight Plan Airport List
3) Turn the large FMS Knob to select the desired
airport.
4) Press the ENT Key.
Select a Nearest Airport
1) With the Airport Information Page displayed,
press the FMS Knob to activate the cursor.
2) Turn the small FMS Knob to the left. Initially, a
flight plan airport list is displayed as in Figure 7-
43. The list is populated only when navigating
a flight plan.
Figure 7-44 Nearest Airport List
3) Turn the small FMS Knob to the right to display
the ‘NRST’ airports to the aircraft’s current
position as shown in Figure 7-44.
4) Turn the large FMS Knob to select the desired
airport.
5) Press the ENT Key.
Select a Recently Entered Airport Identifier
1) With the Airport Information Page displayed,
press the FMS Knob to activate the cursor.
2) Turn the small FMS Knob to the left. Initially, a
flight plan waypoint list is displayed as in Figure
7-43. The list is populated only when navigating
a flight plan.
3) Turn the small FMS Knob to the right to display
the ‘RECENT’ airports as shown in Figure 7-45.
Figure 7-45 Recently Entered Airports List
4) Turn the large FMS Knob to select the desired
airport.
5) Press the ENT Key.
Select an Airport by Facility Name or City
Location
1) With the Airport Information Page displayed,
press the FMS Knob to activate the cursor.
2) Turn the large FMS Knob to the right to select the
facility name or location (city) field.
3) Enter the desired facility name or city.
5) Press the ENT Key. If there are duplicate names
in the database, a list is displayed from which to
choose the desired location.
6) To remove the flashing cursor, press the FMS
Knob.
Access Runway Information
1) With the Airport Information Page displayed,
press the FMS Knob to activate the cursor.
2) Turn the large FMS Knob to place the cursor on
the ‘RUNWAYS’ identifier field.