Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Quest KODIAK
™
100
190-00645-07 Rev. A 73
Additional Features
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
Entering a Scheduler Message
1) Select the AUX - Utility Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the first empty scheduler message
naming field.
4) Use the FMS Knob to enter the message text to be displayed in the Alerts
Window and press the ENT Key.
5) Press the ENT Key again or use the large FMS Knob to move the cursor to
the field next to Type.
6) Turn the small FMS Knob to select the message type:
• Event - Message issued at the specified date/time
• One-time - Message issued when the message timer reaches zero (default
setting)
• Periodic - Message issued each time the message timer reaches zero
7) Press the ENT Key again or use the large FMS Knob to move the cursor to
the next field.
8) For periodic and one-time message, use the FMS Knob to enter the timer
value (HH:MM:SS) from which to count down and press the ENT Key.
9) For event-based messages:
a) Use the FMS Knob to enter the desired date (DD-MM-YY) and press
the ENT Key.
b) Press the ENT Key again or use the large FMS Knob to move the cursor
to the next field.
c) Use the FMS Knob to enter the desired time (HH:MM) and press the
ENT Key.
10) Press the ENT Key again or use the large FMS Knob to move the cursor to
enter the next message.
Deleting a Scheduler Message
1) Select the AUX - Utility Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the name field of the scheduler
message to be deleted.