Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Quest KODIAK
™
100
190-00645-07 Rev. A 71
Additional Features
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
MAINTENANCE LOGS
NOTE: An account must be established with Garmin Connext™ to make full
use of the Maintenance Logs feature.
The system provides recording of CAS, CMC, exceedances, and other critical aircraft
data that occur while the aircraft is on the ground or in flight. This may include, but
is not limited to, engine trend, exceedance and/or aircraft position data.
Viewing the Maintenance Logs Page
1) Turn the large FMS Knob to select the AUX page group.
2) Turn the small FMS Knob to select AUX-MAINTENANCE LOGS Page.
Selecting the Desired Log Folder
1) While viewing the Maintenance Logs Page, press the small FMS Knob to
activate the cursor in the Folders.
2) Turn the small FMS Knob to display the list of available folders. ‘INT’
displayed next to the folder name indicates that folder of log files is stored in
internal system memory. ‘EXT’ displayed next to a folder name indicates the
folder, and its contents are saved to the SD Card located in the bottom card
slot of the MFD.
3) Turn either FMS Knob to select the desired folder.
4) Press the ENT Key. The log files for the selected folder are displayed.
5) Press the small FMS Knob to remove the cursor.
Copy a Log File to an SD Card
1) Place an SD Card in the top card slot of the MFD.
2) While viewing the Maintenance Logs Page, press the FMS Knob to activate
the cursor.
3) Turn the large FMS Knob to display the list of available folders.
4) Turn either FMS Knob to select the desired folder.
5) Press the ENT Key.
6) Turn the large FMS Knob to place the cursor on the ‘EXPORT’ button to the
right of the log file to be transmitted.