Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Quest KODIAK
™
100
190-00645-07 Rev. A
50
Hazard Avoidance
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
4) Press the ENT Key. The cursor flashes on ‘STRMSCP LTNG’.
5) Turn the large FMS Knob to select ‘STRMSCP MODE’.
6) Turn the small FMS Knob to change between ‘CELL’ and ‘STRIKE’ options.
When an item is selected, press the ENT Key.
7) Press the FMS knob to return to the Navigation Map Page.
Manually Clearing Stormscope Lightning Data on the Navigation Map
1) Press the MENU Key.
2) Select ‘Clear Stormscope Lightning
®
’.
3) Press the ENT Key.
NOTE: If heading input is lost, strikes and/or cells must be cleared manually
after the execution of each turn. This is to ensure that the strike and/or cell
positions are depicted accurately in relation to the nose of the aircraft.
Selecting a Stormscope range on the Navigation Map
1) Press the MENU Key.
2) Select ‘MAP SETUP’.
3) Select the ‘Weather’ group.
4) Press the ENT Key.
5) Turn the large FMS Knob to select ‘STRMSCP SMBL’.
6) Turn the small FMS Knob to select the maximum display range.
7) Press the ENT Key.
8) Press the FMS Knob to return to the Navigation Map Page.
Stormscope Page
1) Turn the large FMS Knob until the Map Page group is selected.
2) Turn the small FMS Knob until the Stormscope Page is selected.
3) To change the map range, turn the Joystick clockwise to zoom out or
counter-clockwise to zoom in.
Changing between ‘cell’ and ‘strike’ mode on the Stormscope Page
1) Select the Stormscope Page.
2) Press the MODE Softkey. The CELL and STRIKE softkeys are displayed.