Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Quest KODIAK
™
100
190-00645-07 Rev. A
4
Flight Instruments
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
DISPLAYING WIND DATA
1) Press the PFD Softkey.
2) Press the WIND Softkey to display wind data to the left of the HSI.
3) Press one of the OPTN softkeys to change how wind data is displayed:
• OPTN 1: Headwind/tailwind and crosswind arrows with numeric speed
components
• OPTN 2: Wind direction arrow with numeric headwind (H) or tailwind (T)
and crosswind (X) speed components
• OPTN 3: Wind direction arrow with true numeric direction and speed
4) To remove the window, press the OFF Softkey.
GENERIC TIMER
1) Press the TMR/REF Softkey, then turn the large FMS Knob to select the
time field (hh/mm/ss). Turn the FMS Knobs to set the desired time, then
press the ENT Key. The UP/DOWN field is now highlighted.
2) Turn the small FMS Knob to display the UP/DOWN window. Turn the FMS
Knob to select ‘UP’ or ‘DOWN’, then press the ENT Key. ‘START?’ is now
highlighted.
3) Press the ENT Key to START, STOP, or RESET the timer (if the timer is
counting DOWN, it will start counting UP after reaching zero). Press the
CLR Key or the TMR/REF Softkey to remove the window.
CHANGING VSPEEDS AND TURNING BUGS ON/OFF
1) Press the TMR/REF Softkey.
2) Turn the large FMS Knob to highlight the desired Vspeed.
3) Use the small FMS Knob to change the Vspeed in 1-kt increments (when a
speed has been changed from a default value, an asterisk appears next to
the speed).
4) Press the ENT Key or turn the large FMS Knob to highlight the ON/OFF
field
5) Turn the small FMS Knob clockwise to ON or counterclockwise to OFF.
6) To remove the window, press the CLR Key or the TMR/REF Softkey.