Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Quest KODIAK
™
100
190-00645-07 Rev. A 111
Annunciations & Alerts
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
Flight Plan Import/Export
Results
Description
‘No flight plan files found to
import.’
The SD card contains no flight plan data.
‘Flight plan import failed.’ Flight plan data was not successfully imported from the
SD card.
‘Flight plan partially imported.’ Some flight plan waypoints were successfully imported
from the SD card; however others had errors and were
not imported. A partial stored flight plan now exists in
the system.
‘File contained user waypoints
only.’
The file stored on the SD card did not contain a flight
plan, only user waypoints. One or more of these
waypoints did not import successfully.
‘Too many points. Flight plan
truncated.’
The flight plan on the SD card contains more waypoints
than the system can support. The flight plan was
imported with as many waypoints as possible.
‘Some waypoints not loaded.
Waypoints locked.’
The flight plan on the SD card contains one or
more waypoints that the system cannot find in
the navigation database. The flight plan has been
imported, but must be edited within the system before
it can be activated for use.
‘User waypoint database full. Not
all loaded.’
The flight plan file on the SD card contains user
waypoints. The quantity of stored user waypoints has
exceeded system capacity; therefore, not all the user
waypoints on the SD card have been imported. Any
flight plan user waypoints that were not imported are
locked in the flight plan. The flight plan must be edited
within the system before it can be activated for use.
‘One or more user waypoints
renamed.’
One or more imported user waypoints were renamed
when imported due to naming conflicts with waypoints
already existing in the system.
‘Flight plan successfully exported.’ The stored flight plan was successfully exported to the
SD card.