Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Quest KODIAK
™
100
190-00645-07 Rev. A
106
Annunciations & Alerts
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
GTS 800 MESSAGE ADVISORIES
Message Comments
GTS CONFIG – GTS config error.
Config service req’d.
The GTS and GDU have different copies of the
GTS configuration, or the Mode S address is
invalid. The G1000 system should be serviced.
GTS MANIFEST – GTS software
mismatch, communication halted.
The GTS has incorrect software installed. The
G1000 system should be serviced.
MISCELLANEOUS MESSAGE ADVISORIES
Message Comments
FPL WPT LOCK – Flight plan
waypoint is locked.
Upon power-up, the G1000 system detects that
a stored flight plan waypoint is locked. This
occurs when an navigation database update
eliminates an obsolete waypoint. The flight
plan cannot find the specified waypoint and
flags this message. This can also occur with
user waypoints in a flight plan that is deleted.
Remove the waypoint from the flight plan if it
no longer exists in any database,
Or - update the waypoint name/identifier to
reflect the new information.
FPL WPT MOVE – Flight plan
waypoint moved.
The system has detected that a waypoint
coordinate has changed due to a new
navigation database update. Verify that stored
flight plans contain correct waypoint locations.
TIMER EXPIRD – Timer has expired. The system notifies the pilot that the timer has
expired.
DB CHANGE – Database changed.
Verify user modified procedures.
This occurs when a stored flight plan contains a
procedure that is no longer consistent with the
navigation database. This alert is issued only
after a navigation database update. Verify that
the user-modified procedures in stored flight
plans are correct and up to date.