Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Quest KODIAK
™
100
190-00645-07 Rev. A
100
Annunciations & Alerts
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
Message Comments
NAV1 SERVICE – NAV1 needs
service. Return unit for repair.
A failure has been detected in the NAV1 and/
or NAV2 receiver. The receiver may still be
available. The system should be serviced.
NAV2 SERVICE – NAV2 needs
service. Return unit for repair.
NAV1 RMT XFR – NAV1 remote
transfer key is stuck.
The remote NAV1 and/or NAV2 transfer switch is
stuck in the enabled (or “pressed”) state. Press
the transfer switch again to cycle its operation.
If the problem persists, the system should be
serviced.
NAV2 RMT XFR – NAV2 remote
transfer key is stuck.
G/S1 FAIL – G/S1 is inoperative.
A failure has been detected in glideslope
receiver 1 and/or receiver 2. The system should
be serviced.
G/S2 FAIL – G/S2 is inoperative.
G/S1 SERVICE – G/S1 needs
service. Return unit for repair.
A failure has been detected in glideslope
receiver 1 and/or receiver 2. The receiver may
still be available. The system should be serviced
when possible.
G/S2 SERVICE – G/S2 needs
service. Return unit for repair.
GEA 71 MESSAGE ADVISORIES
Message Comments
GEA1 CONFIG – GEA1 config error.
Config service req’d.
The GEA1 configuration settings do not match
those of backup configuration memory. The
G1000 system should be serviced.
GEA2 CONFIG – GEA2 config error.
Config service req’d.
The GEA2 configuration settings do not match
those of backup configuration memory. The
G1000 system should be serviced.
GEA1 MANIFEST – GEA1 software
mismatch, communication halted.
The #1 GEA 71 has incorrect software installed.
The system should be serviced.
GEA2 MANIFEST – GEA2 software
mismatch, communication halted.
The #2 GEA 71 has incorrect software installed.
The G1000 system should be serviced.