Pilot's Guide

190-00552-01 Rev. D
Garmin G1000 Pilot’s Guide for the Cessna 350/400
6-53
HAZARD AVOIDANCE
DISPLAYING TRAFFIC DATA
Traffic information can be displayed on the following maps when the 9900BX-series unit is operating:
• PFD Inset Map
• Navigation Map Page
• Traffic Map Page
• VOR Information Page
• Trip Planning Page
• Nearest Pages
• Active Flight Plan Page
Displaying traffic information (maps other than the Traffic Map Page):
1) Select the MAP Softkey (for the PFD Inset Map, select the INSET Softkey).
3) Select the TRAFFIC Softkey to display terrain and obstacle data.
When traffic is selected on maps other than the Traffic Map Page, a traffic icon is shown to indicate TAS is
enabled for display.
Displaying traffic on the Navigation Map
1) Ensure that the TAS system is operating. With the Navigation Map displayed, select the MAP Softkey.
2) Select the TRAFFIC Softkey. Traffic is now displayed on the map as shown in the figure.
Proximity
Traffic
Figure 6-61 TAS Traffic on Navigation Map
Traffic
Advisory
TA Off Scale
Banner
Non-Bearing
Traffic Advisories
Non-Threat
Traffic
The Navigation Map Page Setup Menu also controls the display of traffic and the map range settings. Traffic
data symbols and labels can be decluttered from the display. If a map range larger than the map range setting
is selected, the data is removed from the map. Maps besides the Traffic Map Page use settings based on those
selected for the Navigation Map Page.