Pilot's Guide

190-00552-05 Rev. A
Garmin G1000 Pilot’s Guide for the Cessna Corvalis/Corvalis TT
83
ENGINE INDICATION SYSTEM
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
SECTION 3 ENGINE INDICATION SYSTEM
The Engine Indication System (EIS) for the Cessna Corvalis/Corvalis TT displays critical engine, electrical, fuel,
and other system parameters on the left side of the MFD during normal operations. EIS information can be fully
expanded to an entire page (Engine Page) using the SYSTEM Softkey. In reversionary display mode, the display is
configured to present PFD symbology together with the EIS Display (refer to the System Overview for information
about reversionary display mode).
Instrument types include dial gauges, horizontal and vertical bar indicators, digital readouts, slide bars, and bar
graphs. Green bands indicate normal ranges of operation; yellow and red bands indicate caution and warning,
respectively. White bands indicate areas outside of normal operation not yet in the caution or warning ranges.
When unsafe operating conditions occur, the corresponding readouts flash to indicate cautions and warnings.
If sensory data to an instrument becomes invalid or unavailable, a red “X” is displayed across the instrument.
EIS Display
Figure 3-1 MFD (Corvalis TT)