Pilot's Guide

190-00552-05 Rev. A
Garmin G1000 Pilot’s Guide for the Cessna Corvalis/Corvalis TT
53
FLIGHT INSTRUMENTS
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
Vspeeds (Glide, V
X
, and V
Y
)canbechangedandtheiragsturnedon/offfromtheTimer/ReferencesWindow.
Whenactive(on),theVspeedsaredisplayedattheirrespectivelocationstotherightoftheairspeedscale.All
Vspeed values are reset and all flags turned off when power is cycled.
Changing Vspeeds and turning Vspeed flags on/off:
1) Select the TMR/REF Softkey.
2) Turn the large FMS Knob to highlight the desired Vspeed.
3) Use the small FMS Knob to enter the desired value. When a speed has been changed from a default value, an
asterisk appears next to the speed.
4) Press the ENT Key or turn the large FMS Knob to highlight the ON/OFF field.
5) Turn the small FMS Knob clockwise to ON or counterclockwise to OFF.
6) To remove the window, press the CLR Key or the TMR/REF Softkey.
Figure 2-5 Timer/References Window (Corvalis) Figure 2-6 Timer/References Menu
Turning all Vspeed flags on/off:
1) Select the TMR/REF Softkey.
2) Press the MENU Key.
3) To activate all Vspeed flags, highlight ‘All References On’ and press the ENT Key.
4) To remove all Vspeed flags, turn the FMS Knob to highlight ‘All References Off’ and press the ENT Key.
Restoring all Vspeed defaults:
1) Select the TMR/REF Softkey.
2) Press the MENU Key.
3) Turn the FMS Knob to highlight ‘Restore Defaults’ and press the ENT Key.