Pilot's Guide

190-00552-05 Rev. A
Garmin G1000 Pilot’s Guide for the Cessna Corvalis/Corvalis TT
489
ADDITIONAL FEATURES
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
8.8 ELECTRONIC CHECKLISTS (OPTIONAL)
NOTE: The checklists presented in this section are for example only and may not reflect checklists actually
available for the Cessna Corvalis/Corvalis TT. The information described in this section is not intended
to replace the checklist information described in the AFM or the Pilot Safety and Warning Supplements
document.
NOTE: Garmin is not responsible for the content of checklists. User-defined checklists are created by the
aircraft manufacturer. Modifications or updates to the checklists are coordinated through the aircraft
manufacturer. The user cannot edit these checklists.
TheoptionalchecklistfunctionsaredisplayedontwolevelsofsoftkeysthatareavailableonanyMFDpage.
Figure 8-81 Checklist Softkeys
CHKLIST
DCLTR
SYSTEM
MAP
The CHECK Softkey label changes to UNCHECK
when the checklist item is already checked.
EXIT CHECKSYSTEM EMERGCY
SHW CHRT
(Optional)
The MFD is able to displayoptional electronicchecklists which allowa pilot to quickly nd the proper
procedure on the ground and during each phase of flight. The system accesses the checklistsfromanSD card
insertedintothebezelslot.IftheSDcardcontainsaninvalidchecklistleornochecklist,thePower-upPage
messagesdisplay‘ChecklistFile:Invalid’or‘ChecklistFile:N/A’(notavailable)andtheCHKLISTSoftkeyis
notavailable.
Accessing and navigating checklists:
1) From any page on the MFD, select the CHKLIST Softkey or turn the large FMS Knob to select the Checklist Page.
2) Turn the large FMS Knob to select the ‘GROUP’ field.
3) Turn the small FMS Knob to select the desired procedure and press the ENT Key.
4) Turn the large FMS Knob to select the ‘CHECKLIST’ field.
5) Turn the FMS Knob to select the desired checklist and press the ENT Key. The selected checklist item is
indicated with white text surrounded by a white box.
6) Press the ENT Key or select the CHECK Softkey to check the selected checklist item. The line item turns green
and a checkmark is placed in the associated box. The next line item is automatically selected for checking.
Either FMS Knob can be used to scroll through the checklist and select the desired checklist item.
Press the CLR Key or select the UNCHECK Softkey to remove a check mark from an item.