Pilot's Guide

Garmin G1000 Pilot’s Guide for the Cessna Corvalis/Corvalis TT
190-00552-05 Rev. A36
SYSTEM OVERVIEW
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
Restoring system setup defaults:
1) Use the FMS Knob to select the AUX - System Setup Page.
2) Select the DFLTS Softkey.
Or:
1) Use the FMS Knob to select the AUX - System Setup Page.
2) Press the MENU Key.
3) Highlight ‘Restore Defaults’ and press the ENT Key.
Date/time
The Date/Time Box on the System Setup Page displays the current date and time and allows the pilot to set
the time format (local 12-hr, local 24-hr, or UTC) and offset. The time offset is used to define current local
time. UTC (also called GMT or Zulu) date and time are calculated directly from the GPS satellites signals
and cannot be changed. When using a local time format, designate the offset by adding or subtracting the
desired number of hours.
Figure 1-29 System Time (Local 24-hr Format)
PFD
Set the system time format:
1) While on the System Setup Page, press the FMS Knob momentarily to activate the flashing cursor.
2) Turn the large FMS Knob to highlight the time format eld in the Date/Time Box.
3) Turn the small FMS Knob to select the desired system time format (local 12hr, local 24hr, UTC) and press the
ENT Key.
Set the current time offset:
1) While on the System Setup Page, press the FMS Knob momentarily to activate the flashing cursor.
2) Turn the large FMS Knob to highlight the time offset eld in the Date/Time Box.
3) Turn the FMS Knobs to enter the time offset and press the ENT Key.