Pilot's Guide

Garmin G1000 Pilot’s Guide for the Cessna Corvalis/Corvalis TT
190-00552-05 Rev. A30
SYSTEM OVERVIEW
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
(NRST), and recently-entered (RECENT). The G1000 automatically fill in the identifier, facility, and city fields
with the information for the selected waypoint.
Using the MFD/PFD Control Unit keypad to enter data:
1) Choose the desired display control mode by pressing the PFD or MFD Key on the MFD/PFD Control Unit.
2) If needed, press the FMS Knob to activate the cursor.
3) Use the large FMS Knob to highlight the desired field.
4) Use the alphanumeric keys to enter the desired information.
5) Press the ENT Key to confirm the entry
6) Press the CLR Key to cancel data entry (the field revers back to its previous information).
Using the FMS Knob to enter data:
1) If needed, press the FMS Knob to activate the cursor.
2) Use the large FMS Knob to highlight the desired field.
3) Begin entering data by turning the small FMS Knob to select a character for the first placeholder.
Turning the knob to the right scrolls through the alphabet (where appropriate) toward the letter Z, starting in
the middle at K, and the digits zero through nine. Turning the knob to the left scrolls in the opposite direction.
4) Use the large FMS Knob to move the cursor to the next placeholder in the field.
5) Repeat, using the small FMS Knob to select a character and the large FMS Knob to move the cursor, until the
field is complete.
6) Press the ENT Key to confirm entry.
7) Press the FMS Knob or CLR Key to cancel data entry (the field reverts back to its previous information).