Pilot's Guide

190-00552-05 Rev. A
Garmin G1000 Pilot’s Guide for the Corvalis/Corvalis TT
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
335
HAZARD AVOIDANCE
Figure 6-71 Navigation Map Page Setup Menu
Figure 6-70 Navigation Map Page Menu
Figure 6-72 Navigation Map Page Setup Menu, Map Group
TERRAIN-SVS PAGE
TheTerrain-SVSPageisspecializedtoshowterrain,obstacle,andpotentialimpactpointdatainrelation
totheaircraft’scurrentaltitude,withoutclutterfromthebasemap.Itistheprincipalmappageforviewing
terraininformation.Aviationdata(airports,VORs,andotherNAVAIDs)canbedisplayedforreference.Ifan
obstacle and the projected flight path of the aircraft intersect, the display automatically zooms in to the closest
potentialpointofimpactontheTerrain-SVSPage.
Aircraftorientation on thismapis always headingupunless thereis no validheading.  Twoviews are
availablerelativetothepositionoftheaircraft:the360°defaultdisplayandtheradar-likeARC(120°)display.
MaprangeisadjustablewiththeRANGE Knobfrom1to200nm,asindicatedbythemaprangerings(orarcs).
Displaying the Terrain-SVS Page:
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Terrain-SVS Page.
Changing the Terrain-SVS Page view:
1) Select the VIEW Softkey.
2) Select the 360 or ARC Softkey to choose the desired view.
Or:
1) Press the MENU Key.
2) Select ‘View Arc’ or ‘View 360º’ (choice dependent on current state) and press the ENT Key to change the view