Pilot's Guide
190-00552-05 Rev. A
Garmin G1000 Pilot’s Guide for the Cessna Corvalis/Corvalis TT
113
AUDIO PANEL AND CNS
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
VOR/LOC ID
When the MorsecodeIdentieraudioisonforaNAVradio,awhiteIDappearstotheleftoftheactive
NAV frequency.
Intheexampleshown,inordertolistentoeitherstationidentier,presstheNAV1 or NAV2 Key on the
Audio Panel. Pressing the VOL/ID Knob turns off the Morse code audio only in the radio with the NAV
TuningBox.ToturnoffbothNAVIDs,transfertheNAVTuningBoxbetweenNAV1andNAV2bypressing
the small NAV Knob and pressing the VOL/ID Knob again to turn the Morse code off in the other radio.
Figure 4-25 NAV Radio ID Indication
The Morse Code Identifier
for the GHM VOR is On
Station
Identifier
VOLUME
AdjustNAVRadiovolumelevelfrom0to100%usingthe
VOL/ID
Knob. Turning the knob clockwise
increases volume, counterclockwise decreases volume.
When adjusting, the level is displayed in place of the standby frequencies. Volume level indication remains
for two seconds after the change.
Figure 4-26 NAV Volume Levels
NAV Volume
Level Remains
for Two Seconds
AUTO-TUNING A NAV FREQUENCY FROM THE MFD
SelectandloadNAVfrequenciesfromthefollowingMFDpages:
•WPT–AirportInformation
•WPT–VORInformation
•NRST–NearestAirports
•NRST–NearestVOR
•NRST–NearestFrequencies(FSS,WX)
•NRST–NearestAirspaces
The MFD provides auto-tuning of NAV frequencies from waypoint and nearest pages. During enroute
navigation,theNAVfrequencyisenteredautomaticallyintotheNAVstandbyfrequencyeld.Duringapproach
activation the NAV frequency is entered automatically into the NAV active frequency field.
LoadfrequenciesintotheNAVFrequencyBoxfrompagesintheNRSTorWPTpagegroupbyhighlighting
the frequency and pressing the
ENT
Key(Figures4-28,4-29,and4-30).










