Pilot's Guide

190-00552-05 Rev. A Garmin G1000 Pilot’s Guide for the Cessna Corvalis/Corvalis TT 112
AUDIO PANEL AND CNS
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
Manual NAV frequency tuning from the MFD/PFD Control Unit:
1) Press the NAV Key to select the NAV frequency box.
2) Turn the FMS NAV/COM Knob to tune the desired frequency in the NAV Tuning Box (large knob for MHz; small
knob for kHz).
Or:
Press the Numeric Keys on the keypad to enter a Frequency
3) Press the Frequency Transfer Key to transfer the frequency to the active field.
Ifanerrorismadeduringfrequencyentrywiththenumerickeypad,pressingtheBKSP Key moves the cursor
backonespace.Ifanincorrectfrequencyisentered,reenterthecorrectoneusingthesameprocedure.
Figure 4-23 Frequency Tuning from the MFD/PFD Control Unit
Second, turn the FMS NAV/COM Knob to enter a
Frequency into the COM Standby Frequency Field
Third, press the Frequency Transfer Key to move
the Frequency to the Active Field.
First, press the
NAV
Key to place the
Tuning Selection
Box on the NAV
frequencies
SELECTING THE RADIO TO BE TUNED
Press the small NAVKnobtotransferthefrequencytuningboxandFrequencyTransferArrowbetweenthe
upper and lower radio frequency fields.
Figure 4-24 Switching NAV Tuning Boxes
Press the NAV Knob to
Switch the Tuning Box From
One NAV Radio to the Other