Pilot's Guide

190-00552-05 Rev. A Garmin G1000 Pilot’s Guide for the Cessna Corvalis/Corvalis TT 102
AUDIO PANEL AND CNS
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
Manual COM frequency tuning from the MFD/PFD Control Unit:
1) Press the COM Key to select the COM frequency box.
2) Turn the FMS NAV/COM Knob to tune the desired frequency in the COM Tuning Box (large knob for MHz; small
knob for kHz).
Or:
Press the Numeric Keys on the keypad to enter a Frequency
3) Press the Frequency Transfer Key to transfer the frequency to the active field.
Ifanerrorismadeduringfrequencyentrywiththenumerickeypad,pressingtheBKSP Key moves the cursor
backonespace.Ifanincorrectfrequencyisentered,reenterthecorrectoneusingthesameprocedure.
Figure 4-8 Frequency Tuning from the MFD/PFD Control Unit
Second, turn the NAV/COM Knob to enter a
Frequency into the COM Standby Frequency Field
Third, press the Frequency
Transfer
Key to move the
Frequency to the Active Field.
First, press the
COM
Key to place the
Tuning Selection
Box on the COM
frequencies